Riding jackets-FAQ
1. What can I do about a jammed zip?
2. How long does the impregnation of a riding jacket last?
3. Is the waterproofness of the riding jacket reduced by regular washing?
4. What are the differences between transitional and winter riding jackets?
5. What makes a good winter riding jacket?
6. When should I start using a winter riding jacket?
8. How is breathability measured?
9. Can I also ride in my normal winter coat?
1. What can I do about a jammed zip?
Zips need to be looked after if they are used frequently. A zip spray can be used here. This cleans and lubricates the zips so that they can be used again without problems. Regular use of the spray is recommended for optimal results. If a zip is defective, please note that it is a part that is subject to wear. If the defect is due to a material defect, the defective part can be repaired.
2. How long does the waterproofing of a riding jacket last?
Impregnation is an essential maintenance component for all jacket models that are supposed to protect against water and wind. However, they are not infinitely durable. Accordingly, regular refreshing or renewal is essential. With the right waterproofing spray or detergent, the jacket’s protection can be maintained. The product’s care instructions should always be followed.
3. Does regular washing reduce the waterproofness of the jacket?
Washing the rain jacket correctly directly contributes to maintaining the protection against rain. Before washing, carefully read the care instructions that are directly on the product; this will help to prevent errors in use and possible damage to the product. Use a special impregnating detergent that does not clog the pores of the membrane. Fabric softeners and detergents can also clog the pores of the jacket due to their nature and composition and thus destroy the waterproof membrane in the long term.
4. What are the differences between seasonal jackets and winter jackets?
Seasonal jackets must be able to provide warmth that can withstand low temperatures. Waterproof and windproof or wind- and water-repellent properties are also the focus of seasonal riding jackets. For winter riding jackets, the focus is mainly on thermal performance, as they have to keep the rider warm even at temperatures below freezing. Find out more in our summer and transition jackets guide and in our winter riding jackets guide.
5. What makes a good winter riding jacket?
A good winter riding jacket is characterised by good thermal insulation as well as waterproof, windproof and breathable properties. If the zip is covered by a button placket, additional wind protection is provided. Find out more about our winter riding jackets in our winter riding jacket guide.
6. When should I start wearing a winter riding jacket?
When the transitional jacket can no longer withstand the cold temperatures, it is time to use the winter riding jacket. This usually goes hand in hand with the onset of frosty temperatures (0°C). However, depending on the weather and the perceived ambient temperature, this can also happen earlier. The riding jacket must keep the rider warm in the stable and on the horse in winter and protect them from moisture. A must in the cold season is definitely a thickly padded, warm riding jacket that makes even frosty rides a successful riding excursion. A cosy fur hood or a high stand-up collar provide protection from icy drafts. Fleece-lined inside pockets keep your hands especially warm in cool temperatures. Find out more about our winter riding jackets in our winter riding jacket guide.
7. What is a waterproofness?
The breathability of a jacket is determined by the water vapour permeability of the material. This is expressed in MVP; this describes the amount of water vapour that can be released over an area of 1 square metre within 24 hours. Jackets for sports use should have a breathability of at least 3000 g/m²/24h. This principle is maintained as long as the water vapour content inside is higher than outside. At high humidity and temperatures above 15°C, breathable clothing reaches its limits.
8. How is breathability measured?
The breathability of a jacket is determined by the water vapour permeability of the material. This is expressed in MVP; this describes the amount of water vapour that can be released over an area of 1 square metre within 24 hours. Jackets for sports use should have a breathability of at least 3000 g/m²/24h. This principle is maintained as long as the water vapour content inside is higher than outside. At high humidity and temperatures above 15°C, breathable clothing reaches its limits.
9. Can I also ride in my normal winter coat?
For the use of the riding coat on the horse, riding vents as well as a 2-way zip are necessary. Learn more in our riding coat guide.